| T O P I C R E V I E W |
| greyghost |
Posted - Jun 25 2009 : 08:16:17 AM
I've used my sewing machine heavily for nine years almost and never gotten it cleaned. I found it will cost $100 to get that done, which seems terribly expensive to me. I figured some of you ladies on here would know how to do a decent enough servicing that I needn't spend nearly half what we paid for the thing on a cleaning!
So how do you do it? I was thinking of using the air compressor on a low pressure level to blow out the lint from the thread, and I'm sure it needs some kind of lubricant but what kind, and where do you place it?
Thanks! |
| 6 L A T E S T R E P L I E S (Newest First) |
| akmom7 |
Posted - Oct 02 2009 : 4:59:11 PM
My dad just came up from the states to visit, and as always he cleaned up my grandmothers sewing machine for me. This has been his job since he was a boy and he automatically makes it part of his list of to do's for me. :-) A little can of oil, a small tooth brush and a very tiny screw driver and in 15 minutes it is hummin' right along! :-)
Cara Mae
#315 |
| Greyhound Mom |
Posted - Jul 22 2009 : 06:09:35 AM
Last year I got a new Husquavarna sewing machine, that I just love! I had a JC Penny sewing machine for about 22 years that I used almost every day. Actually I still have it for a backup, just in case something happens! I never took that machine in for repair. But regularly cleaned out the dust with the spray can of Dust and Lint Remover that you would use for your computer. It really works great and gets into all those places where you can't reach! And also I oiled it now and then.
B~
"The earth does not belong to us; we belong to the earth, and we have a sacred duty to protect her and return thanks for the gifts of life." |
| JojoNH |
Posted - Jul 09 2009 : 04:53:28 AM
Wish we were closer to each other, I would show you how! 
If you have your manual that came with the machine, it tells you where to place the oil and the grease if needed. ( if you do not have the manual, you can get a replacement from singer, just go to their site and look under the parts section)
Joanna #566
JojoNH
http://www.CountryCents.com
http://CountryCents.Blogspot.com
http://Twitter.com/Eastwooddesigns |
| greyghost |
Posted - Jun 29 2009 : 07:11:23 AM
Thanks ladies!
My machine is really simple, a basic Singer model so I should be able to work on it. Thanks for the tips! |
| Sheep Mom 2 |
Posted - Jun 25 2009 : 10:53:51 PM
It depends on the machine. Some computerized machines must be cleaned and serviced by a dealer. My viking doesn't require oil at all. The only home maintenance is to remove and clean the bobbin case. Be sure and study the manual on your particular machine. Basic machines are pretty easy to clean and oil. Get a mini vacume attachment for you vacume cleaner and suck out all the lint and thread. Don't use the canned air and try to blow the debris out or you could actually force it into the "works" and cause problems. Good luck. As expensive as the servicing is, they do more than just oiling - they also check the belts and timing and tweak anything that might be out of time.
Blessings, Sheri
"Work is Love made visible" -Kahlil Gibran |
| gramadinah |
Posted - Jun 25 2009 : 08:28:37 AM
Sewing machines are pretty easy to take apart and put back together. I got a free Brother machine from a friend and it was rusted so it wouldn't even move so by taking it apart and putting sewing machine oil on everything that moved it is up and running. But remember it will take a bit for all the oil to get set in so don't sew anything but scraps for a while. A pipecleaner will get a lot of dust out too.But that said if you are having tension or any other problems the bucks are a great investment.
Diana
Farmgirl Sister #273 |
