T O P I C R E V I E W |
Alee |
Posted - Aug 06 2005 : 9:38:58 PM Hi Ladies!
I was just wondering from all you soap makers out there- have you ever used a plaster board/box to speed cure you soap? I also do pottery as a hobby and when wedging the clay (getting the air bubbles out) we wedge on a plaster board so that you can also work out extra water out of the clay. Since plaster will absorb water from the air and anything set on it- I was just wondering if anyone had used it to cure soap on and if so- did it work?
I went to the farmer's market today and had a decent selling day and I would really like to ramp up production, but having a limited amount of tools and molds to use after the milling process, I need to find a way to cure faster.
Thanks
Alee |
5 L A T E S T R E P L I E S (Newest First) |
Alee |
Posted - Aug 12 2005 : 12:28:34 AM Okay so the Plaster and Soap idea has been a total flop. Not only did it NOT speed up the process....I think it actually drew water INTO the soap!! My "plaster" soaps are softer than when I put them in the molds and they are all goopy. Ick...
So I guess I shall have to ditch this idea....
Alee |
sqrl |
Posted - Aug 08 2005 : 09:14:30 AM I would think it would speed up the process, I'm not sure if thats a good thing or not. I know we wait to ph test the soap until it's cured because the ph does change in those weeks of curing. I would just test the soap to make sure. Keep us posted!
Blessed Be
![](http://www.sqrlbee.com/images/sqrlbee_logo_1.jpg) www.sqrlbee.com/artisan
|
Alee |
Posted - Aug 07 2005 : 09:03:15 AM Thanks for the input! I think I will go get some plaster today and convert the soap box that I had made into a plaster box. Since I am using my crockpot for my soap and milling it all- the box is not gettting used much right now :(. Plus I can get another made any time! :)
If anyone needs a soap box made, I can get some made for about $5 for a 12X12 inch box that is 3-4 inches deep!
Ciao
Alee |
ThymeForEweFarm |
Posted - Aug 07 2005 : 04:14:02 AM It's worth a try. It shouldn't change the end product because the soap is already finished. The curing is done after the soap is initially made. Milled soap just needs to go through a second drying time.
How about a dehumidifier? That should keep the air around the soap much drier. A fan will also help.
Robin Thyme For Ewe Farm www.thymeforewe.com |
Aunt Jenny |
Posted - Aug 06 2005 : 10:39:21 PM I have never heard of doing it with soap. I don't know if rushing it would be good.
Jenny in Utah The best things in life arn't things! |