MaryJanesFarm Farmgirl Connection
Join in ... sign up
 
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password        REGISTER
Forgot your Password?

 All Forums
 General Chat Forum
 Garden Gate
 Question on lawn mower blades
 New Topic  Reply to Topic
 Printer Friendly
Author Garden Gate: Previous Topic Question on lawn mower blades Next Topic  

prariehawk
True Blue Farmgirl

2914 Posts

Cindy

2914 Posts

Posted - Sep 08 2013 :  5:43:37 PM  Show Profile
I borrowed my dad's lawn mower this evening to mow the lawn and just as I was finishing up, I ran over some concrete edging hidden under the grass and bent the lawn mower blade. I plan to take it to a repair shop tomorrow. Question: can they bend the blade back into its original shape or do they replace it with a new one? Does it cost very much? For some reason the mower didn't work very well this evening. The last time I used it, no problem. But this time, it kept wanting to die in the thick grass. My dad overfilled it with gasoline before I used it, would that make it die? It's a fairly cheap brand of mower. He just got it this year.
Cindy

"Vast floods can't quench love, no matter what love did/ Rivers can't drown love, no matter where love's hid"--Sinead O'Connor
"In many ways, you don't just live in the country, it lives inside you"--Ellen Eilers

Visit my blog at http://www.farmerinthebelle.blogspot.com/

queenmushroom
True Blue Farmgirl

985 Posts

Lorena
Centerville Me
USA
985 Posts

Posted - Sep 08 2013 :  6:03:00 PM  Show Profile
Thick grass could put extra strain on the pulleys causing the motor to stall. Mow at a higher highroad the set the deck down to the preferred height. Running over the curb could have done more than bend the blades. The spindle that drives the blades could also be damagd. You won't know until you take it in to be looked.at.

Patience is worth a bushel of brains...from a chinese fortune cookie
Go to Top of Page

edlund33
True Blue Farmgirl

1507 Posts

Marilyn
Renton WA
USA
1507 Posts

Posted - Sep 08 2013 :  7:42:18 PM  Show Profile
What a bummer! If the blade is bent the shop should replace it with a new one. Once blades are bent the metal weakens in the vicinity of the crease and they aren't safe to use if they are straightened. Depending on the brand of mower and style of blade they can run anywhere from $15 upwards. And Lorena is right, if the blade got bent then the spindle or crankshaft on the mower could have been damaged too. Hopefully it's just the blade that's bent. If the grass was tall or wet when you were mowing it that would bog the engine down and cause it to die. Lifting the deck up to a higher cutting height or cutting no more than half a swath of tall grass at a time may help reduce the stress on the engine. Good luck!

Cheers! ~ Marilyn

Farm Girl No. 1100

http://blueskyanddaisies.blogspot.com

Do not go where the path may lead, go instead where there is no path and leave a trail. - Ralph Waldo Emerson
Go to Top of Page

prariehawk
True Blue Farmgirl

2914 Posts

Cindy

2914 Posts

Posted - Sep 08 2013 :  8:30:47 PM  Show Profile
Thanks, ladies! I hope it's only the blade that's bent. I had the mower set as high as it would go. The last time I used it, the grass was just as thick and it worked fine. seem to be having bad luck with mowers. I have an electric mower but it needs a new battery, which I'm having trouble locating.
Cindy

"Vast floods can't quench love, no matter what love did/ Rivers can't drown love, no matter where love's hid"--Sinead O'Connor
"In many ways, you don't just live in the country, it lives inside you"--Ellen Eilers

Visit my blog at http://www.farmerinthebelle.blogspot.com/
Go to Top of Page

prariehawk
True Blue Farmgirl

2914 Posts

Cindy

2914 Posts

Posted - Sep 10 2013 :  10:43:30 PM  Show Profile
Well, it turned out to be just the blade that was bent, so they put a new one on it. My dad said the old blade was made with a cheap metal that bends easily--maybe that's why it didn't hurt the crankshaft. I'm glad it was something easy to fix. and it didn't cost much. :)
Cindy

"Vast floods can't quench love, no matter what love did/ Rivers can't drown love, no matter where love's hid"--Sinead O'Connor
"In many ways, you don't just live in the country, it lives inside you"--Ellen Eilers

Visit my blog at http://www.farmerinthebelle.blogspot.com/
Go to Top of Page

edlund33
True Blue Farmgirl

1507 Posts

Marilyn
Renton WA
USA
1507 Posts

Posted - Sep 11 2013 :  8:38:58 PM  Show Profile
Thanks for the update.....so glad to hear it was just the blade!

Cheers! ~ Marilyn

Farm Girl No. 1100

http://blueskyanddaisies.blogspot.com

Do not go where the path may lead, go instead where there is no path and leave a trail. - Ralph Waldo Emerson
Go to Top of Page
  Garden Gate: Previous Topic Question on lawn mower blades Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Snitz Forums 2000 Go To Top Of Page